- ページ 13
アクセサリー Baumer DENEX Gripper LEDのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Baumer DENEX Gripper LED 24 ページ。
ページを印刷する
6.4
DIP-Switch Settings
An 8-pole DIP-switch can be reached via the lid on top of the sensor. Unscrewing the
screw opens the lid.
The software can be controlled via the DIP switches.
DIP-Switch positions
= OFF
= ON
DIP-switches 1-4 are reserved for factory.
DIP-switches 5-8 are for selecting operation mode
All in OFF-position is the default setting.
DIP-Switches
5 6 7 8
Mode 0 =
Default
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Mode 6
Mode 7
Mode 8
Mode 9
Mode 10
Mode 11
Mode
0
1
2
3
4
5
6
7
8
9
User Manual DENEX Gripper LED
Version 2013-02, V1.4
Standard newspaper: 15% Blocking, Output 5ms
Double production: 30% Blocking time. Output 5 ms
Gripper Pulse Mode Output NO, Reset on falling edge of speed sensor
Gripper Pulse Mode Output NC, Reset on falling edge of speed sensor
Gripper Pulse Mode Output NO, Reset on rising edge of speed sensor
Gripper Pulse Mode Output NC, Reset on rising edge of speed sensor
Gripper Pulse Mode Output NO, Reset on falling edge of speed sensor
Standard newspaper: 15% Blocking, Output 20ms
Double production: 30% Blocking time, Output 20 ms
Standard newspaper: 30% Blocking, Output 20ms
reserved
reserved
STATUS LED shows:
Lit when target is recognized by sensor
Lit when target is recognized by sensor
Speed sensor status
Speed sensor status
Speed sensor status
Speed sensor status
Lit when target is recognized by sensor
Lit when target is recognized by sensor
Lit when target is recognized by sensor
Not applicable
13/24
www.baumer.com
Baumer Electric AG
Frauenfeld, Switzerland