- ページ 11

防犯カメラ Dahua DH-IPC-HDW3849HP-AS-PVのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Dahua DH-IPC-HDW3849HP-AS-PV 20 ページ。 Eyeball network camera

2.2 Modifying Device IP Address

● You can modify IP address of one or multiple devices at one time. This section is based on

modifying IP addresses in batches.

● Modifying IP addresses in batches is available only when the corresponding devices have

the same login password.

Step 1

Do Step1 to Step4 in "2.1 Initializing Device" to search devices in your network

segment.

After clicking Search setting, enter the username and password, and make sure that

they are the same as what you set during initialization; otherwise there will be wrong

password notice.

Step 2

Select the devices whose IP addresses need to be modified, and then click Modify IP.

The Modify IP Address interface is displayed.

Step 3

Select Static mode, and then enter start IP, subnet mask, and gateway.

● IP addresses of multiple devices will be set to the same if you select the Same IP

check box.

●

If DHCP server is available in the network, devices will automatically obtain IP

addresses from DHCP server when you select DHCP.

Step 4

Click OK.

Step 1

Open IE browser, enter the IP address of the device in the address bar, and then

press the Enter key.

If the setup wizard is displayed, finish the settings as instructed.

Step 2

Enter the username and password in the login box, and then click Login.

Figure 2-3 Modify IP address

Quick Start Guide