- ページ 9

防犯カメラ Dahua DH-IPC-HF8232FPのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Dahua DH-IPC-HF8232FP 16 ページ。 Hd box network camera

button becomes orange after you enabled the audio talk function. Click "Talk" button again to

stop the bidirectional talk function.

Step 3

Input audio to speaker or MIC on the device end and PC respectively, and receive the audio via

earphone on the device end and PC.

1.4 Alarm Setup

Note:

Some devices don't support alarm function, which can't be applied to this chapter.

The alarm interface is shown as in Figure 1-3.

Figure 1-3

The alarm input, output connection description:

Step 1

Connect the alarm input device to the IN alarm input port on the rear panel I/O port.

Step 2

Connect the alarm output device to the N1 and C1 or N2 or C2 NO of I/O port on

the rear panel. The alarm output port supports NO (normally open) alarm device only.

Step 3

Open the Web; go to the Figure 1-3. Here you can make the alarm input setup and alarm output

setup. Here the alarm input is the alarm input on the corresponding rear panel I/O port (as IN

port). Then you can select the corresponding type (NO/NC) according to the high/low level type

when an alarm occurs.

Step 4

Set the WEB alarm output. The alarm output 01 is the alarm output port of the device rear panel

I/O port (as the NO port).

Please refer to the following figure for alarm input information. See Figure 1-4.