- ページ 26

アクセサリー Baumer GIM500RのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Baumer GIM500R 29 ページ。 Inclination sensors
Baumer GIM500R にも：マニュアル (20 ページ), マニュアル (13 ページ), 組み立て説明書 (2 ページ)

ページを印刷する

3.4.3.1 Resolution (6000h)

This object shall indicate the resolution of the Slope at X axis (object 6010h) and the Slope a Y axis (object

6020h) objects based on 0,001°.

This resolution is also valid for the 32-bit value objects (6110h and 6120h). Ex works the default value is 0,1°

(64h). The following table describes all possible resolutions:

64h (100d)

3E8h (1000d)

3.4.3.2 Operating Parameters (6011h/6021h/6111h/6121h)

The above mentioned operating parameter influences the output inclination in the following manner:

Bit Mask:

Bit 7

Default

i = Inversion (0 = Do not enable inversion; 1 = Enable inversion)

s = Scaling (0 = Do not enable scaling; 1 = Enable scaling)

The scaling is active at the factory, the inversion of the sign is deactivated (object value 2H).

Scaling means that the following equation is applied:

Output slope value = A + B + C

where

A is a physically measured angle (current tilt angle / value);

B is a differential slope offset (The difference slope offset is always added to the current skew);

C is a slope offset (Slope offset is set by the CANopen preset function).

(See chart scaling function)

Baumer_GIM500R_CANopen_MA_EN.docx

03.19

Resolution (6000h)

Value

01h (1d)

Ah (10d)

Bit 6

Bit 5

Reserved

Bit 4

Bit 3

26/29

Description

0,001°

0,01°

0,1°

1°

Bit 2

Bit 1

www.baumer.com

Bit 0