- ページ 11

ネットワーク・ルーター Asus AAM6000EVのPDF クイック・セットアップ説明書をオンラインで閲覧またはダウンロードできます。Asus AAM6000EV 17 ページ。 Aam6000ev/e user's manual
Asus AAM6000EV にも：ユーザーマニュアル (32 ページ), ユーザーマニュアル (20 ページ)

ページを印刷する

192.168.1.3 or 192.168.1.4 or 192.168.1.xx etc.. If the address of your PC does not match the subnet range of the gateway then

either the address of your PC or the gateway must be changed to suite.

18. Finally enter a valid web site name on the 'Address' line e.g. www.solwise.co.uk! It should work!!

9. Next, from your PC go Start/Run/winipcfg.

10. Make sure that the Ethernet Adapter Information is for your

actual network card (see the example below).

11. Check you have sensible numbers for IP address, Subnet,

and Default Gateway. If you just have 0.0.0.0 then either you

haven't correctly setup you IP settings on your PC or, if trying

to use DHCP, you haven't correctly setup DHCP on the router.

Also check that the IP address for your PC is on the same

subnet as the address given for the gateway e.g. if the gateway

is 192.168.1.1 then your computers should be addresses where

the first three numbers match e.g. PC's could be 192.168.1.2 or

12. Click on More Info and check you have a valid DNS address, if not then

check you have it set correctly in your IP settings or the DHCP setup on the

router... Remember that if you are using the DNS Relay feature of the router

then the DNS address should be the same address as the router/gateway.

13. Then start your browser. If using IE then goto Tools/Internet

Options/Connections. Check it says 'Never dial a connection'

- 11 -

8. Now drop into DOS (DON'T PANIC!

Just do start/run enter 'command' and

then click on OK) and at the '>' command

prompt type 'ping' followed by the router

address (remember the DEFAULT router

address is 192.168.1.1 but if you've

changed this remember to use the new

address):

You should get a reply if not then check

the addresses of your computer match the

gateway (as shown below)....