- ページ 10

ネットワーク・ルーター Asus AAM6020BI-T4のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Asus AAM6020BI-T4 38 ページ。 Cpe (customer premises equipment) adsl 4 port router

ページを印刷する
8.
If prompted, click on
9.
After restarting your PC, double-click on the Network and Dial-up Connections icon in the
Control Panel.
10. In Network and Dial-up Connections window, right-click on the Network icon, and then select
Properties.
11. In the Network Properties dialog box, select TCP/IP, and then click on
12. In the TCP/IP Settings dialog box, click in the radio button labeled Use the following IP address
and type 192.168.1.x (where x is any number between 2 and 254) and 255.255.255.0 in the IP
address field and Subnet Mask field, respectively.
13. Click on
3.2.4

Windows 95, 98:

1.
In the Windows task bar, click on the Start button, point to Settings, and then click Control
Panel.
2.
Double-click on the Network icon.
The Network dialog box is displayed with a list of currently installed network components. If the list
includes TCP/IP, the protocol has already been enabled, in which case you can skip to Step 9.
3.
If TCP/IP does not appear as an installed component, click on
Network Component Type dialog box appears.
4.
Select Protocol, and then click
The Select Network Protocol dialog box appears.
5.
Click on Microsoft in the Manufacturers list box, and then click TCP/IP in the Network Protocols
list box.
6.
Click
You may be prompted to install files from your Windows 95/98 installation CD. Follow the
instructions to install the files.
7.
Click on
8.
After restarting your PC, open the Control Panel window, and then click on the Network icon.
9.
Select the network component labeled TCP/IP, and then click on
If you have multiple TCP/IP listings, select the listing associated with your network card or adapter.
10. In the TCP/IP Properties dialog box, click on the IP Address tab.
11. Click in the radio button labeled Use the following IP address and type 192.168.1.x (where x is
any number between 2 and 254) and 255.255.255.0 in the IP address field and Subnet Mask field,
respectively.
12. Click on
Windows. Please click on
to restart your computer with the new settings.
twice to confirm and save your changes, and then close the Control Panel.
.
to return to the Network dialog box, and then click
to restart the PC and complete the TCP/IP installation.
twice to confirm and save your changes. You will be prompted to restart
and restart your PC again.
10
AAM6030BI User Manual
.
. The Select
again.
.
10