- ページ 12
防犯カメラ Dahua HAC-HDW2501T-Z-A-27135のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Dahua HAC-HDW2501T-Z-A-27135 19 ページ。 Hdcvi eyeball camera
ページを印刷する
No.
Item
①
Mounting surface
⑤
Device
Step 1
Find the mounting template sticker from the accessory pack and stick it to the mounting
surface①
Step 2
Drill screw holes (and the cable outlet hole if it needs to go through the mounting
surface) on the mounting surface as indicated on the mounting template, then insert
expansion bolts② from the accessory pack in the screw holes.
Step 3
The disassembly way of model A is different from which of model B and model C.
For model A, hold the pedestal③ tightly and keep the device⑤ upward, rotate the
fixing ring⑦ counterclockwise until you can detach it from above, and then take off
the pedestal③.
For model B and model C, loosen the locking screw⑨ with the supplied wrench⑧
and take the pedestal③ off.
Step 4
Adjust the location of the pedestal③ according to cable outlet requirement (top out or
side out), then pull the cable out through mounting surface or the side cable tray. Align
the screw holes on the pedestal③ to those on the mounting surface, then put in and
fasten the supplied self-tapping screws④ to attach the device⑤ to the mounting
surface.
Step 5
Connect the camera to power source and the XVR device, and the live view screen will
be displayed.
Step 6
The assembly and adjustment way of model A is different from which of model B and
model C.
For model A, put the fixing ring⑦ back to hold the enclosure⑥, leave some
spaces enough for you to adjust the device⑤. Aim the lens to the ideal angle (see
Figure 3-3) and fasten the fixing ring⑦.
No.
Item
②
Expansion bolt
⑥
Enclosure
Table 3-2
Figure 3-2
No.
Item
③
Pedestal
⑧
Wrench
No.
Item
④
Self-tapping screw
⑨
Locking screw
Installation 6