- ページ 9

計測機器 COM-power corporation FCLCE-452のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。COM-power corporation FCLCE-452 19 ページ。 Rf current probe, calibration fixture

Page 9 of 18

INSTRUCTION MANUAL

Fixture Opening

The CLCE-452 is installed within this opening so that the center conductor rod of the fixture

passes through the approximate center of the probe aperture.

Center Conductor Rod

This is the fixture's center conductor.

Calibration Fixture Coaxial Ports

These are female N-type coaxial connectors providing input/output connections to the

fixture.

Thumb Screws for Removable Top Plate

These (4) screws secure the fixture's top plate to the fixture assembly.

Removable Top Plate of Fixture

In order to install/remove the clamp into/from the calibration fixture, the top plate must be

removed by removing the six (6) thumb screws. The top cover and thumb screws must be

replaced prior to the performance of tests.

Teflon Spacers

These spacers help in centering the clamp within the fixture; and thereby aligning the center

conductor through the center of the probe window.

- P R O D U C T I N F O R M A T I O N

S E C T I O N 3

Rev090519