- ページ 6

試験装置 COM-power corporation LI-125CのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。COM-power corporation LI-125C 16 ページ。 Line impedance stabilization network

3.2

Incoming Inspection

To avoid possibility of electrical shock, do not apply power to the LISN if there is

any evidence of shipping damage. If shipping damage to the product or any of

the accessories is suspected, or if the package contents are not complete,

contact Com-Power or your Com-Power distributor.

Please check the contents of the shipment against the package inventory in

section 3.3 to ensure that you have received all applicable items.

3.3

Equipment, accessories, and documents supplied with the model LI-125C LISN are

as follows:

3.4

The following safety instructions have been included in compliance with safety

standard regulations. Please read them carefully.

1 9 1 2 1 E l T o r o R d ● S i l v e r a d o , C a l i f o r n i a 9 2 6 7 6 ● ( 9 4 9 ) 4 5 9 - 9 6 0 0 ● c o m - p o w e r . c o m

 Calibration data and Certificate traceable to NIST.

 Superior Electric shrouded plugs for EUT and power connection.

Optional items

 ISO-17025 calibration data and certificate.

 External transient limiter model LIT-153.

• READ AND RETAIN INSTRUCTIONS - Read all safety and operating

instructions before operating the instrument. Retain all instructions for

future reference.

• HEED WARNINGS - Adhere to all warnings on the instrument and

operating instructions.

• FOLLOW INSTRUCTIONS - Follow all operating and use instructions.

• WATER AND MOISTURE - Do not use the instrument near water.

• VENTILATION - The instrument should be used/installed only in locations

where the flow of air through the ventilation openings is not impeded.

• MOUNTING – The instrument can be used in Horizontal or vertical

orientation as long as the ventilation holes are not obstructed and the

protective grounding is not defeated.

• HEAT - The instrument should be situated away from heat sources such as

heat registers or other instruments which produce heat.

LI-125C LINE IMPEDANCE STABILIZATION NETWORK

Page 6 of 16

INSTRUCTION MANUAL

REV011617