- ページ 7

電動工具 Doughpro DP3300のPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Doughpro DP3300 12 ページ。 Electro-mechanical automatic dough press

ページを印刷する

International Symbols

Preventative Maintenance Suggestions

The Doughpro DP3300 machines are

relatively maintenance free. For a long

and trouble-free life, the following

preventative maintenance should be

followed:

Daily Care:

1. Teflon coated platens: These

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

platens should only be cleaned

with mild soap and warm water

then wiped off with a clean, soft

cloth or soft sponge. Never use

steel wool or harsh abrasives or

you will cause costly damage.

Note that the top plate of the

lower platen is removable

without tools, for cleaning

purposes. To remove, simply

rotate the platen to the full open

position and remove the top

plate.

2. All other exterior surfaces:

Here again a daily wipe down

with mild soap and warm water

will do the job quite nicely.

Never use steel wool or harsh

abrasives or you will cause

costly damage.

Monthly Care:

Piston maintenance: The piston is the

one moving part that requires a grease

injection every two (2) to three (3)

months. A grease port located on the

right side of the upper platen piston is

provided for this purpose. Using a

standard grease gun fitted with an

extension, squeeze a food approved,

high temperature grease into the grease

port.

Service Problems:

Contact our factory or approved service

agency (U.S. only). Note: When

contacting factory for information, parts

or service instructions, it is of the utmost

importance that the serial number of the

machine be provided. This number can

be found on the serial plate located on

the rear of the machine.

-6-

DP3300 1410/20003/40002 5/03