- ページ 9

メディア・コンバーター Baumer 22106のPDF 据付・取扱説明書をオンラインで閲覧またはダウンロードできます。Baumer 22106 36 ページ。 Sine encoder with support plate for a torque arm

Security indications

3.1

Risk of injury due to rotating shafts

Hair and clothes may become tangled in rotating shafts.

• Before all work switch off all operating voltages and ensure machinery is stationary.

3.2

Risk of destruction due to electrostatic charge

Electronic parts contained in the sine encoder are sensitive to high voltages.

• Do not touch plug contacts or electronic components.

• Protect output terminals against external voltages.

• Do not exceed max. operating voltage.

3.3

Risk of destruction due to mechanical overload

Rigid mounting may give rise to constraining forces.

• Never restrict the freedom of movement of the sine encoder. The installation instructions must

be followed.

• It is essential that the specified clearances and/or angles are observed.

3.4

Risk of destruction due to mechanical shock

Violent shocks, e. g. due to hammer impacts, can lead to the destruction of the optical sensing system.

• Never use force. Assembly is simple when correct procedure is followed.

• Use suitable puller for disassembly.

3.5

Risk of destruction due to contamination

Dirt penetrating inside the sine encoder can cause short circuits and damage the optical sensing

system.

• Absolute cleanliness must be maintained when carrying out any work on the open terminal box.

• When dismantling, never allow lubricants to penetrate the sine encoder.

3.6

Risk of destruction due to adhesive fluids

Adhesive fluids can damage the optical sensing system and the bearings. Dismounting an sine

encoder, secured to a shaft by adhesive may lead to the destruction of the unit.

3.7

Explosion risk

You can use the sine encoder in areas with explosive atmospheres of category 3 D and 3 G. The

operation in other explosive atmospheres is not permissible.

MB175c - 11087595

Baumer_HOGS75-c_II_DE-EN (13A2)

Security indications

