- ページ 15

メディア・コンバーター Baumer AMG 81 D13のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Baumer AMG 81 D13 15 ページ。 Absolute encoder with devicenet

9.2

Display elements (status display)

A DUO LED (green/red) is located in the bus cover which works in accordance with DeviceNet specification

in the combined module/network status and supplies information about the status of the encoder and the

network.

LED status

Status

Off

Not connected

Green flashing

Device active and online

No connections set up

Green

Device active and online

Connections are set up

Red

Critical device error critical

communication error

Red flashing

Repairable error

MB704.E – 10A1 – Firmware version 1.01

22.10.2010 / bja

Description

No power supply

- Dupl. MAC-ID Check not finished.

- Power supply not connected

The device is working under normal conditions and

is online, but no connection has been set up.

- The encoder has not yet been configured by the

master

- Configuration not complete or faulty

The device is working under normal conditions and

is online, connections in "set up" status"

The device is an irreparable error status

- No network communication possible

- User address has been assigned twice (MAC-ID)

I/O connections are in time-out status

15/15

P.O. Box 12 69 43 · D-10609 Berlin, Germany

Phone: +49 (0)30/69003-0 · Fax: +49 (0)30/69003-104

Baumer Hübner GmbH

Technical modification reserved