- ページ 12

メディア・コンバーター Baumer GEMMWのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Baumer GEMMW 41 ページ。 Absolute encoders with profinet interface with bus cover
Baumer GEMMW にも：マニュアル (26 ページ), マニュアル (24 ページ)

ページを印刷する

E/A fields require defining partial process images in clock-synchronous operation, in the example it is TPA1.

Take care that the selected partial process image comprises the initial address. If not it will result in an error

signal when interpreting the project.

5.5. Parameterization

Upon double-click on the encoder icon at the bus bar, the window „Properties-DP-Slave" pops up, showing

the tabs "General", "Parameter Assignment" and "Clock synchronisation".

5.5.1.

General

System parameters under tab „General" may usually be adopted without modifications.

If required, encoder name, diagnosis address and node ID under button „Profibus..." may be altered. Further

here is the option to deactivate the encoder's response monitoring.

5.5.2.

Parameter assignment

Manual_ProfibusDPV2_BIDE_EN.docx

22.11.12

12/41

Baumer IVO GmbH & Co. KG

Villingen-Schwenningen, Germany