- ページ 15

メディア・コンバーター Baumer GXAMSのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Baumer GXAMS 41 ページ。 Absolute encoder with powerlink interface
Baumer GXAMS にも：マニュアル (19 ページ), マニュアル (26 ページ), マニュアル (24 ページ), マニュアル (19 ページ)

ページを印刷する

5.5.3.

Clock synchronisation

Clock-synchronous operation is activated by a tick on "SynchronizeDP-Slave at equidistant DP-cycle".

Time Ti marks the time before the equidistant bus clock (Global Control Message, GC) where the encoder is

sensing the position data with micro-second precision. It should be aimed at the smallest possible value.

250 µs minimum is admissible if encoder operation is without scaling, i.e. always with the maximum

resolution. For enabled scaling the minimum value is 375µs. In case several clock-synchronous DP-slaves

exist in the bus that require more time for data evaluation automatically the maximum value will be utilized.

Time To is insignificant to the encoder. Usually the projecting software makes a proposal under consideration

of correlations to other bus parameters.

Manual_ProfibusDPV2_BIDE_EN.docx

15/41

Baumer IVO GmbH & Co. KG

22.11.12

Villingen-Schwenningen, Germany