アクセサリー Douglas Pickleball Premier SQのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Douglas Pickleball Premier SQ 2 ページ。 Surface mount
ページを印刷するDouglas® Pickleball Premier™ SQ
Surface Mount
Set
Screw
NOTE:
Ensure pulley on
cap is facing away
from the court and
the net cable is
installed down the
side of the post
and into gears.
It should NOT be
installed down
through the cap.
Hardware is located inside the end of take up post and
Includes (1) removable chrome handle and (4) eyebolts.
POST INSTALLATION:
1. Use 1/2" Bolts (not included) to
secure posts to the court surface.
Posts should be square to the
playing surface 22' apart,
measured inside-to-inside.
2. Install hardware to post
3. Adjust set screw to tighten
tennis post caps.
4. Screw on the top and bottom
eyebolts to each post.
CARE & MAINTENANCE
During the off season, it is best to
winterize your court by removing
the tennis posts and storing them
indoors.
Cap
Take Up Post
POST & BOLT PLATE
7"
Pickleball Post Locations
22' apart, measured Inside-to-Inside
Existing Center Anchor
9/16"
3/4"
Plate: 6" x 7"
Holes: 9/16"
Hole Pattern: 4-1/2" x 5"
Install with 1/2" Bolts
(not Included)
6"
Item # 63080
Eyebolts
Dummy Post
1"
4-1/2"
(Post side with gears and lacing rods)
6"
36"
NOT TO SCALE
5"
7"