- ページ 10
防犯カメラ Dahua Vari-focalのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Dahua Vari-focal 20 ページ。 Vari-focal dome network camera
Device initialization and IP setting can be finished with the "ConfigTool" or in web interface. For more
information, see the WEB operation manual.
Device initialization is available on select models, and it is required at first use and after device is
being reset.
Device initialization is available only when the IP addresses of the device (192.168.1.108 by
default) and the PC stays in the same network segment.
Planning useable network segment properly to connect the device to the network.
The following figures and interfaces are for reference only, and the actual product shall prevail.
2.1
Initializing Device
Step 1
Double-click "ConfigTool.exe" to open the tool.
Step 2
Click
The Modify IP interface is displayed. See Figure 2-1.
Step 3
Click Search setting.
The Setting interface is displayed.
Step 4
Enter the start IP and end IP of the network segment in which you want to search devices,
and then click OK.
All the devices found in the network segment are listed.
Select one or several devices whose Status is Uninitialized, and then click Initialize.
Step 5
2
Network Configuration
.
Figure 2-1
Modify IP interface
4
Quick Start Guide