- ページ 7

自動車アクセサリー Douglas Dynamics SnowEx Power Plow 8611のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Douglas Dynamics SnowEx Power Plow 8611 17 ページ。 Snowplow

A‑FRAME TO BLADE ASSEMBLY

1. Align the pivot bolt hole on the A‑frame with the

pivot bolt hole on the quadrant.

2. Install the pivot bolt from the top. Secure with a

1" locknut (found in the parts bag) and tighten the

locknut as much as possible while allowing the

A-frame and quadrant to pivot.

3. Move the snowplow into a normal operating

position.

Lit. No. 52238, Rev. 05

INSTALLATION INSTRUCTIONS

1" x 4" Clevis Pins

1" x 9"

Pivot Bolt

1" Locknut

(in parts bag)

4. Remove the protective packaging from the angle

rams.

5. Align the holes in the rod end of the angle ram

with the corresponding holes on the back of the

quadrant.

6. Install a 1" x 4" clevis pin (from the shipping

bracket) from the top down to attach each rod.

Secure the clevis pins with 1/4" x 1‑1/2" cotter pins

from the parts bag.

1/4" x 1-1/2"

Cotter Pin

July 15, 2020