- ページ 11

メディア・コンバーター Baumer PMG10 SeriesのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Baumer PMG10 Series 41 ページ。 Absolute encoders with profinet interface
Baumer PMG10 Series にも：取付・取扱説明書 (32 ページ)

ページを印刷する

4.3.3.

Manual name assignment

To perform an I/O system network scan, go to „PLC" – „Edit Ethernet Node" – „Browse". The scan provides

all bus nodes. In the example the PLC and encoder „encoder01" was found.

The MAC address serves as a unique identifier. When clicking the button „Flash" the highlighted device will

flash its status-LED so it can be found easily amongst other devices.

A double-click on the desired line (here: encoder "encoder01") opens the window "Edit Ethernet Node"

Enter the new name required for configuration in line „Device name". Click "Assign name" to execute. After

this, the encoder will immediately be recognized with this name in the PROFINET Network.

Baumer_BUDE-PROFINET_MA_EN.docx

14.06.2016 / bja

11/41