- ページ 10

計測機器 Baumer CleverLevel PL20H/SのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Baumer CleverLevel PL20H/S 44 ページ。 Level measurement adaptive trigger – hygienic/industrial

ページを印刷する

CleverLevel

Adaptive trigger – hygienic/industrial

Configuration via remote teach

Sensors that are installed in inaccessible locations

can be easily configured via remote teach.

With the aid of qTeach, teaching of the adaptive

trigger can be in empty tank state if required

(zeroing) e.g. to suppress any interfering influence

that may be present. Restore default in the sensor

settings is also possible.

Note: Remote teach has to be activated with

FlexProgram. The configuration is only possible

during the first 5 minutes after connecting the

sensor to the power supply. Within the 5 minutes,

the switch being configured does not work.

9 The remote teach function is activated with

FlexProgrammer 9701 before the integration of

the sensor.

Short-circuit the switch output which has remote

teach activated with GND (0 V).

The LED rapidly blinks magenta.

Continue as described in „Configuration via

qTeach", step 1 and 2.

Instead of a screwdriver, use the GND.

Configuration via IO-Link master

Switch points, hysteresis, damping, output mode,

etc. can be configured through an IO-Link master.

Connect IO-Link master to sensor.

Connect IO-Link master to PC and set

parameters with the aid of BSS.

BSS is a versatile software tool for evaulation,

testing and parameterization of IO-Link devices.

Furthermore, BSS alows for connecting various

IO-Link masters, including USB-C IO-Link master.

The BSS software, the related manual and a

detailed description of IODD parameters and

process data are available for download on the

product page at www.baumer.com.

10 / 44

Level measurement

PL20H/S

Operating Instructions

Configuration via FlexProgrammer 9701 and

Switch points, hysteresis, damping, output mode,

etc. can be configured via FlexProgram and

FlexProgrammer 9701. Furthermore, a visualization

of the measured value can be displayed by using

the online measurement in FlexProgram.

Connect the FlexProgrammer 9701 to the

sensor:

M12 plug version: Connect with the black head

M12 plug.

Cable version: Connect with crocodile clips.

Connect the red clip to Pin 1 (+Vs) and the

black clip to Pin 3 (GND).

Connect the FlexProgrammer 9701 to a PC with

FlexProgram installed.

Set parameters (refer to the HELP menu in

FlexProgram for more information)