- ページ 18

計測機器 Baumer Hubner HENQ 1100のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Baumer Hubner HENQ 1100 36 ページ。 Encoder analyzer

ページを印刷する

OPERATION / MENU DESCRIPTION

7.2

Menu description

7.2.1

Parameter setting (menu

The HENQ 1100 makes provision for the attachment of any encoder with TTL

(RS422), HTL or SinCos output signals�

The encoder data are entered in menu

If the device is used in conjunction with encoders from Baumer Hübner, then the

appropriate type (

16. Because of the large number of Baumer Hübner encoder types, the field for

selection is restricted to the most common models available at present� When the

encoder type has been selected, the parameters

Puls , with K2 , RefLevel and Pulse-No are displayed for checking�

If your encoder is not present in the selection menu, select '

Fig.6, page

meters through the menu items

Pulse-No , seee

It is also possible to edit the encoder database by using the "config" key, see

Fig.7, page

############# , MaxSpeed , inv.Sig. , ZeroPuls , with K2 , RefLevel and

Pulse-No can be set individually�

Fig.2:

15/32

1 - 40 ) can be selected in the menu item ENCODER , see

16) in the menu item

Fig.4, page 16

18� In the following submenu, the parameters encoder name

Display menu

)

as follows:

ENCODER � Then you can set the encoder para-

inv.Sig. , ZeroPuls , with K2 , RefLevel and

Fig.5, page

Errors : on / off

off : Error messages will be disabled (for

error search)�

MaxSpeed : #####

Maximum speed

Glitch : #

picture 1

0 ≤

≤ 7 Settings of the glitch filter see sec-

tion

7.2.1.1�

MS_Error : ##:##

Pulse/pause error: setting the max� deviation�

MB112EN - 11185046, 19A1, Baumer_HENQ1100_OI_EN

MaxSpeed , inv.Sig. , Zero-

0 ' (User Setting, see

16, individually by hand�

Fig.5, page