- ページ 8

ワイヤレスルーター Asus WL-566gMのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Asus WL-566gM 25 ページ。 240 mimo wireless router

WL-566gM Wireless Router User Manual

PPTP user

If you are using PPTP services, select

A D S L c o n n e c t i o n t h a t r e q u i r e s

username, password and IP address.

It is know as PPTP. Fill in the username,

password and IP address provided by your

ISP into the ﬁelds. Click Next to continue.

Static IP user

If you are using ADSL or other connection

type that uses static IP addresses,

select ADSL or other connection type

that uses static IP address. Input the

IP address, subnet mask, and default

gateway provided by your ISP. You can

choose to specify DNS servers, or select

to get DNS information automatically.

After the connection type setting is

complete, you are to set up your wireless

interface. Specify to your wireless router

an SSID (Service Set Identifier), which

is a unique identiﬁer attached to packets

sent over WLAN. This identiﬁer emulates

a password when a device attempts to

communicate with your wireless router via

WLAN. To connect to a wireless router,

your wireless card must use the same

SSID.

If you want to protect transmitted data, select a middle or high Security Level to enable

encryption methods.

Medium: Only users with the same WEP key settings can connect to your wireless router and

transmit data using 64bits or 128bits WEP key encryption.

High: Only users with the same WPA pre-shared key settings can connect to your wireless

router and transmit data using TKIP encryption.

herk036@adsl-comfort