- ページ 16

ワイヤレスルーター Asus WL520GC - Wireless RouterのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Asus WL520GC - Wireless Router 49 ページ。 Broad range wireless family router
Asus WL520GC - Wireless Router にも：ユーザーマニュアル (31 ページ), クイック・スタート・ガイド (30 ページ), クイック・スタート・マニュアル (8 ページ)

WL-520GU/GC Broad Range Wireless Family Router User Manual

Authentication

The authentication methods supported by WL-520GU/GC include: Open, Shared

key, WPA-Personal, WPA2-Personal, WPA-Auto-Personal (TKIP. AES. TKIP+AES),

WPA-Enterprise, WPA2-Enterprise, WPA-Auto-Enterprise (TKIP. AES. TKIP+AES),

and Radius with 802.1x.

Open: This option disables authentication protection for wireless network.

Shared Key: This mode uses the WEP keys currently in use for authentication.

WPA-Enterprise, WPA2-Enterprise, WPA-Personal, WPA2-Personal, WPA-

Auto-Personal: WPA stands for WiFi-Protected Access. WPA provides two

security modes: WPA for enterprise network, and WPA-PSK for home and SOHO

users. For enterprise network, WPA uses the already existing RADIUS server for

authentication; for home and SOHO user, it provides Pre-Shared Key (PSK) for

user identification. The Pre-Shared Key consists of 8 to 64 characters.

Radius with 802.1x: Similar with WPA, this solution also uses RADIUS server

for authentication. The difference lays on the encryption mothods: WPA adopts

TKIP or AES encryption methods, while Radius with 802.1X does not provide

encryption.

When authentication and encryption are set, click Finish to save the settings and

restart the wireless router.

3) Setting up Virtual Server in Your LAN

Virtual Server is a Network Address Translation (NAT)

function which turns a computer within a LAN into a server

by allowing data packets of certain service, such as HTTP,

from Internet.

1. Click Virtual Server in NAT Setting folder to open the NAT configuration page.

2. Select Yes to enable virtual

server. For example, if host

192.168.1.100 is FTP server

which is to be accessed by

Internet user, it means all

packets from Internet with

destination port as 21 are to

be directed to the host. Set

Well-known Application to

FTP. Port range to 21, Local

IP to the host IP, Local Port

to 21, Protocol to TCP.

3. Click Finish.

4. Click Save & Restart to

restart the wireless router

and activate the settings.