- ページ 2

レシーバー Comar Systems AIS-2-USBのPDF インストールおよびクイックリファレンスマニュアルをオンラインで閲覧またはダウンロードできます。Comar Systems AIS-2-USB 2 ページ。

ページを印刷する

Fault finding:

No power light is displayed

●

Check that the computer is on and the USB cable is connected

Channel A and Channel B lights do not flash

●

Check that a VHF antenna is fitted and correctly connected.

●

Check that the antenna is correctly positioned – i.e. at a suitable

location to visibly 'see' vessels.

Channel A and Channel B lights flash but no data is received

If the red channel lights flash then data is being received from

nearby vessels.

●

Check on the PC application or device that the correct port is

assigned and the correct baud rate is setup. The correct baud rate

is 38400.

I can receive ships on my display but no names are shown.

●

Remember that the names of ships as well as other static

information is only sent every 6 minutes or when requested by

another station.

Specification:

Dimensions Overall:

120 x 86 x 37

Power:

via USB

Current:

130mA

Output:

Via USB NMEA 0183

Message type:

VDM

Baud Rate:

38400 (4800 by internal link)

Receiver:

Dual Channel Parallel

Frequency:

161.975 and 162.025MHz

Sensitivity:

-112dBm

Connections:

USB2.0 type B

Cable:

1m type A to type B

Antenna:

BNC 50 Ohm

www.busse-yachtshop.de | [email protected]

Installation

and

Quick Reference Guide

AIS-2-USB

Receiver