- ページ 3
海上ラジオ Comar Systems CSB200のPDF プログラミング・マニュアルをオンラインで閲覧またはダウンロードできます。Comar Systems CSB200 10 ページ。 Class b ais transponder
Comar Systems CSB200 にも： 設置および取扱説明書 (20 ページ)
ページを印刷する
CSB200 Class B AIS
5.
The application will install and launch automatically
6.
A Start Menu folder and shortcut will be created with the name
'proAIS'. This short cut should be used to re-launch the
application as required
Removal
The proAIS application can be removed at any time via the Windows
Control Panel 'Add or Remove Programs' tool.
AIS Connection
1.
Launch the proAIS application by navigating to the 'proAIS'
shortcut on the Start Menu.
2.
The initial application screen will appear as shown below (exact
screen display depends on version installed)
3.
The application requires a serial connection to the CSB200.
Connect the CSB200 transponder to an available serial port.
R1.0
5
CSB200 Class B AIS
4.
Select the serial port from the drop down menu, then click
'Connect':
5.
Once a connection is established the application is ready to
use. Connection status is indicated at the bottom left of the
application window:
6.
The functions of proAIS are arranged in a series of tabs. Each
tab contains information relating to a particular aspect of the
connected AIS transponder. Depending on the version of proAIS
installed not all tabs shown below may be visible.
•
Static data tab
o
Displays the 'Static data' for the connected AIS
transponder. This includes the vessel's name, call sign,
MMSI number and other fixed information
o
Allows editing of the static data
•
GPS Status tab
o
Shows the status of the internal GPS receiver, including
position fix data and satellite signal strength graph
•
Diagnostics tab
o
Shows the status of key system diagnostics. Used to
troubleshoot installation of the transponder and verify
correct operation.
•
Other Vessels tab
o
Shows information about other vessels in the area received
from the AIS transponder
R1.0
6