- ページ 20

デジタルカメラ Baumer SXC21cのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Baumer SXC21c 48 ページ。 Sxc series cameralink cameras with truesense imaging sensors
Baumer SXC21c にも：クイック・スタート・マニュアル (2 ページ)

ページを印刷する

Figure 12 ►

Temperature measure-

ment points of Baumer

SXC cameras.

Environmental Requirements

6.5.

6.5.1. Temperature and Humidity Range

Storage temperature

Operating temperature*

Housing temperature

**)***)

* For environmental temperatures ranging from (value A) to (value B), please pay atten-

tion to the max. housing temperature. The values are listed in the table below:

Caution

Provide adequate dissipation of heat, to ensure that the temperature does

not exceed +60°C (+140°F).

The surface of the camera may be hot during operation and immediately

after use. Be careful when handling the camera and avoid contact over a

longer period.

Storage and Operating Humidity

6.5.2. Heat Transmission

It is very important to provide adequate dissipation of heat, to ensure that the housing

temperature does not reach or exceed +60°C (+140°F). As there are numerous possibili-

ties for installation, Baumer do not specifiy a specific method for proper heat dissipation,

but suggest the following principles:

▪

operate the cameras only in mounted condition

▪

mounting in combination with forced convection may provide proper heat dissipation

Please refer to the respective data sheet.

**)

Measured at temperature measurement point (T).

***)

Housing temperature is limited by sensor specifications.

Temperature

-10°C ... +70°C ( +14°F ... +158°F)

+5°C ... +60°C (+41°F ... +140°F)

max. +60°C (+140°F)

Humidity

10% ... 90%

Non-condensing