ページを印刷するIN ORDER NOT TO INFRINGE THE I.S. CERTIFICATION
OF THIS PRODUCT, THE FOLLOWING MUST BE
1. Battery type Duracell MN1604 must only be used.
2. Battery replacement must only take place in a non-
hazardous area.
3. Battery connector must only be replaced with the
specified Comark type.
4. No modifications or repairs to be carried out except
by an authorised Comark Service Representative.
C9006IS is a C9006X Series Instrument.
A full description of the operation of the modes of the C9006IS is
given below. Please read it carefully and if you have any further
queries contact our Sales Desk.
HOW TO USE THE COMARK C9006IS THERMOMETER
Firmly press each button once. The display will show any changes
you have made.
ON/OFF
Press to turn ON. (Keep pressed if you want to see all the
display symbols).
Note: The instrument performs a self-test for up to 4
seconds when switched on. Press this button again to turn
the instrument OFF.
WARNING
OBSERVED:
3