- ページ 11
キャッシュカウンター Baumer FLDK 110C1303/S42のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Baumer FLDK 110C1303/S42 35 ページ。 Laser copy counter
ページを印刷する
7
Installation
7.1
Electrical connection
Make the electrical connections as specified in Sections 10.2 Electrical data and 10.3 Pin assignement.
7.2
Mounting
(1) Mount the sensor at the nominal working
distance h (+/-3 mm) with the front
window parallel to the conveying plane.
(2) Adjust the sensor so that the laser beam
is aimed towards the edges to be
counted. When mounted correctly, the
overlap of the copies is facing in the
same direction as indicated in the
alignment aid. Note: the laser beam is
focused into a line which must be aligned
in parallel to the edge to be detected!
(3) Block the laser beam after the objects
whenever possible.
(4) Keep the window clean (remove any
fingerprints after mounting!).
(5) A direct line of sight from the laser impact
point to the entire front window must be
ensured.
Manual SCATEC-2
Version 2021-09
4
1
Clean window
Line focus perpendicular to
the Scatec housing
11
www.baumer.com
2
+/- 3°
5
2
Beam blocker
3
Baumer Electric AG
Frauenfeld, Switzerland
1