- ページ 12

キャッシュカウンター Baumer FLDK 110G1006/S14のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Baumer FLDK 110G1006/S14 35 ページ。 Laser copy counter

Nominal working distance h

Angular tolerance

Overlap orientation

Running direction

Front window

Manual SCATEC-2

Version 2021-09

FLDK...1003/...; FLDK...1303/...

FLDK...1005/...; FLDK...1006/...

The resolution is dependent on the distance. The highest resolution is

achieved at the nominal working distance. (See also Section 10.6 Specific

application data)

max. +/- 3°

The copies are counted when the edge facing the laser beam moves

through the beam. If an edge faces away from the beam, it is not detected.

Tail edges are therefore not counted unless they face upwards.

The SCATEC-2 permits both running directions. The edges facing the

laser beam (front edges) are detected by the sensor regardless of the

running direction.

The direct line of sight from the impact point

of the laser to the entire front window must

not be obstructed by any hardware in a

distance range

d = 0 – 80 mm

FLDK 110x1003/Sxx

FLDK 110x1303/Sxx

d = 0 – 120 mm FLDK 110x1005/Sxx

FLDK 110x1006/Sxx

If mountings or other components are close

to this zone for any reason, you should

consult a technician from Baumer electric.

www.baumer.com

40 mm above the conveyor belt

100 mm above the conveyor belt

Baumer Electric AG

Frauenfeld, Switzerland