- ページ 19
キャッシュカウンター Baumer FLDM 170C1030/S42のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Baumer FLDM 170C1030/S42 44 ページ。 Laser copy counter
ページを印刷する
C8:
Input values:
Function:
Comments:
C9:
Input values:
Function:
Comments:
C10:
Input values:
Function:
User manual Scatec-10 / -15
Version 2017-10
ScaDiag would display the warning "conveyor in reverse".
Dead time (msec)
0 to 999 in steps of 1
to define the dead time as fixed value in milliseconds.
This parameter is accessible only if previously in menu C3 fixed dead time (C3 = 02)
was activated.
Pulse delay
0 = off
output pulse issued immediately after end of the edge
1 = on
output pulse issued with delay relative to end of the edge
to define whether the output pulse is issued right after the end of an edge or with the
delay as specified in menu C10 or C11.
A delayed output pulse is required in the following two applications:
1.)
to trigger an action which is delayed relative to the end of the edge (for
example: to trigger an ink jet printer for labeling newspapers)
2.)
to suppress tail edges (for details see C13)
This parameter is accessible only if menu C2 false pulse suppression was
previously activated (C2 = on). Depending on the mode of false pulse suppression
choosen in menu C3, the output pulse delay will be specified in menu C10 in
milliseconds or in menu C11 in millimeters.
The following sketch shows schematically the signal sequence of undelayed and
delayed output pulse sequences. Note that both dead time and the output pulse are
triggered with the end of an edge. However, the output pulse issue might be delayed
while the dead time always starts right with the trigger.
Scatec-1x
on
off
on
t
off
high
p
low
high
z
low
time
Pulse delay (msec)
0 to 999 in steps of 1
to define the value of the output pulse delay in milliseconds.
www.baumer.com
[20ms]
Running direction
z
[100ms]
19 / 44
[Dead time ms]
[Pulse Delay]
amber edge-LED
dead time
(length t)
undelayed output pulse
(pulse length p)
delayed output pulse
(delay z)
[Pulse Delay ms]
Baumer Electric AG
Frauenfeld, Switzerland