- ページ 9
産業機器 Baumer HOGS 75 KのPDF 据付・取扱説明書をオンラインで閲覧またはダウンロードできます。Baumer HOGS 75 K 36 ページ。 Sine encoder
Baumer HOGS 75 K にも： 設置および操作マニュアル (32 ページ), 取付・取扱説明書 (32 ページ), 取付・取扱説明書 (32 ページ)
ページを印刷する
3
Security indications
3.1
Risk of injury due to rotating shafts
Hair and clothes may become tangled in rotating shafts.
• Before all work switch off all operating voltages and ensure machinery is stationary.
3.2
Risk of destruction due to electrostatic charge
Electronic parts contained in the sine encoder are sensitive to high voltages.
• Do not touch plug contacts or electronic components.
• Protect output terminals against external voltages.
• Do not exceed max. operating voltage.
3.3
Risk of destruction due to mechanical overload
Rigid mounting may give rise to constraining forces.
• Never restrict the freedom of movement of the sine encoder. The installation instructions must
be followed.
• It is essential that the specified clearances and/or angles are observed.
3.4
Risk of destruction due to mechanical shock
Violent shocks, e. g. due to hammer impacts, can lead to the destruction of the optical sensing system.
• Never use force. Assembly is simple when correct procedure is followed.
• Use suitable puller for disassembly.
3.5
Risk of destruction due to contamination
Dirt penetrating inside the sine encoder can cause short circuits and damage the optical sensing
system.
• Absolute cleanliness must be maintained when carrying out any work on the open terminal box.
• When dismantling, never allow lubricants to penetrate the sine encoder.
3.6
Risk of destruction due to adhesive fluids
Adhesive fluids can damage the optical sensing system and the bearings. Dismounting an sine
encoder, secured to a shaft by adhesive may lead to the destruction of the unit.
3.7
Explosion risk
You can use the sine encoder in areas with explosive atmospheres of category 3 D and 3 G. The
operation in other explosive atmospheres is not permissible.
MB175c - 11087595
Baumer_HOGS75-c_II_DE-EN (13A2)
Security indications
3
6