- ページ 4

コントロールパネル Advanced MxPro 4 4100SのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Advanced MxPro 4 4100S 12 ページ。

1 Introduction

Advanced Electronics Ltd declares that the Mx-4100S meets the CE requirements of the following EU

Directives:

Low Voltage Directive 2006/95/EC

EN60950-1: 2006

Electromagnetic Compatibility Directive 2004/108/EC

EN61000-6-3:2001

EN50130-4: 1995 +A1:1998 +A2: 2003

1.2

BEFORE INSTALLATION – Refer To the Ratings shown on the label inside

the product and to the 'Specifications Chart' in this document.

STOP

Please read this manual carefully. If you are unclear on any point DO NOT

proceed. Contact the manufacturer or supplier for clarification and guidance.

Only Trained service personnel should undertake the Installation,

Programming and Maintenance of this equipment.

This product has been designed to comply with the requirements of the Low

Voltage Safety and the EMC Directives. Failure to follow the installation

instructions may compromise its adherence to these standards.

This equipment is constructed with static sensitive components. Observe anti-

static precautions at all times when handling printed circuit boards. Wear an

ATTENTION

anti-static earth strap connected to panel enclosure earth point. Before installing

OBSERVE PRECAUTIONS

FOR HANDLING

ELECTROSTATIC

SENSITIVE DEVICES

or removing any printed circuit boards remove all sources of power (mains and

battery).

The Mx-4100 is a Single Loop, Analogue Addressable Fire Alarm Control Panel.

The Mx-4100S is designed for use with the Apollo Discovery, Explorer, XP95 and Series 90 and Hochiki ESP

fire detection devices.

The Mx-4100S provides all of the same capabilities as the other panels in the Mx-4000 range but does not have

provision for connection to a network. The panel is a stand-alone unit only.

This manual covers specific information for the Mx-4100S Fire Alarm Control Panel only.

Refer to the Mx-4000 Series User Manual (Document No. 680-015) for details of how to operate the panel.

Refer to the Mx-4000 Series Installation Manual (Document No. 680-014) for all other details on the installation

and programming of the panel.

The available EN54 functions and Options with requirements are fully detailed in manual 680-014.

Safety of information technology equipment

Emissions, Class B

Immunity, Product Family Standard