- ページ 3
スイッチ Amphenol RESMLAC 8US CAPS SXのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Amphenol RESMLAC 8US CAPS SX 12 ページ。 Rj-switch
ページを印刷するSection 1
This manual will help you install and maintain the Amphenol Rugged Ethernet Unmanaged
Overview
switches. These products are extremely easy to install and operate because little or no user
configuration is required. Once the Ethernet connections are made and the unit is powered
up it will immediately begin to operate.
Military applications can now take full advantage of 100Mbps Fast Ethernet performance.
The installation guide describes how to install and use the hardened compact Ethernet
RESMLAC8USCAPSSX Military Rugged Switch. Capable of operating at extreme
temperature of -35°C to +75°C and meet the toughest industrial and military environments
such as MIL-STD-810F, MIL-STD-1275B, MIL-STD-461E up to the highest levels. The
mentioned ability turns the RESMLAC8USCAPSSX to the optimal solutions switch of
choice for harsh environments constrained by space.
Developed for military and harsh mobile applications, the RESMLAC8USCAPSSX
features mechanical packaging enhancements designed for MIL-STD-810F airborne and
ground environmental compliance and high reliability. The unit has been especially hardened
to improve ingress, impact, and shock/vibration protection, as well as eliminate all moving
parts through passive cooling, and interface through sealed MIL-D-38999 circular
connectors.
Leveraging best-in-class switching technology from Techaya, the RESMLAC8USCAPSSX
serves as a robust solution for providing local area network (LAN) connectivity to IP-
enabled computing and net-centric devices. Compact in size, the RESMLAC8USCAPSSX
is particularly useful for expanding port density to tactical IP routers in space-constrained
airborne and ground vehicle environments.
RESMLAC8USCAPSSX is specifically designed for Data Acquisition & Transmission,
Battlefield Communication C4ISR, Rugged Networks, Mobile Communications, Combat
vehicles and Avionic & Shipboard Systems.
Unlike an Ethernet hub that broadcasts all messages out all ports, these switches will
Operation
intelligently route Ethernet messages only out the appropriate port. The major benefits of
this are increased bandwidth and speed, reduction or elimination of message collisions, and
deterministic performance when tied with Unmanaged systems.
The switch supports double speed 10/100BaseTx (up to 100 Mbps).
Each of these ports will independently auto-sense the speed, allowing you to interface to
regular or fast Ethernet devices.
Refer to following sections for more information on operation and features.
These general specifications apply to these switches. Refer to Section 5 for complete
Performance
technical specifications.
Specifications
RESMLAC 8US CAPS SX - UM rev. 1.0
Amphenol
– 948, Promenade de l'Arve – B.P. 29 – 74311 THYEZ Cedex – France - +33(0)4.50.89.28.00 –
www.rjswitch.com
General Information
Ports
10/100BaseT(x) (Shielded RJ45)
Voltage
24Vdc Nominal (18-32V)
Power Consumption: 2.8W Typical
Ethernet Standards
IEEE 802.3 (10BaseT), 802.3u (100BaseTX), 802.3x (Full Duplex),
Speed Per Port
RJ45: 100 Mbps (half duplex) or 200 Mbps (full duplex)
MILSTD-1275, MILSTD-461E, MILSTD-810F GM, IP67
MIL standards
MIL-STD-461E Electromagnetic compatibility
Electromagnetic
RE-02, RS-03
-35ºC to +75ºC (-31ºF to +167ºF) – Cold Start-Up
Operating Temp.
Waterproof
IP67
Page 3 of 12
Last Rev: 21-Jan-13