- ページ 11
スイッチ Amphenol RJS-9ES SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Amphenol RJS-9ES Series 13 ページ。 Unmanaged ethernet switch with 5/9 ports 10/100 mbps
ページを印刷する
Section 7
Technical
Specifications
Copper Ports: (10/100BaseTx)
10/100BaseT(x) ports
Protocols supported
Ethernet compliancy
Auto-crossover
Auto-negotiating
Auto-polarity
Flow control
Ethernet isolation
Plug and play
Cable requirements
Max. cable distance
Multimode Fiber Port: (100BaseFX)
Fiber port mode
Fiber port connector
Optimal fiber cable
Center wavelength
TX output power
RX input sensitivity
Maximum distance
Half and full duplex
Ethernet compliance
Eye safety
Singlemode Fiber Port: (100BaseFX)
Fiber port mode
Fiber port connector
Optimal fiber cable
Center wavelength
TX output power
RX input sensitivity
Maximum distance
Half and full duplex
Ethernet compliance
Eye safety
Unmanaged Switch User Manual
Amphenol
– 948, Promenade de l'Arve – B.P. 29 – 74311 THYEZ Cedex – France - +33(0)4.50.89.28.00 – www.rjswitch.com
Downloaded from
Elcodis.com
electronic components distributor
Technical Specifications
Here are the technical specifications for these switches covered by this manual.
Half or full duplex (port 9 is full duplex only)
Twisted pair (Cat. 5 or better) (shielded recommended)
IEC 60825-1, Class 1; FDA 21 CFR 1040.10 and 1040.11
20 km, 40 km (long haul models) or more (contact Amphenol)
IEC 60825-1, Class 1; FDA 21 CFR 1040.10 and 1040.11
Shielded RJ45
All standard IEEE 802.3
IEEE 802.3, 802.3u, 802.3x
Yes , Auto-mdi/mdix-crossover
10BaseT or 100BaseTX
Yes (except port 9)
1500 VRMS 1 minute
Yes
100 meters
Multimode
Duplex SC or ST
50/125, 62.5/125 µm
1300 nm
Contact Amphenol for optical details.
4 km (see web or details)
Switch or jumper selectable
100BaseFX
Singlemode
Duplex SC or ST
9/125, 10/125 µm
1300 nm
Contact Amphenol for optical details.
Switch or jumper selectable
100BaseFX
Page 11 of 13
Last Revised: 11-Jul-06