- ページ 4

産業機器 Dover Blackmer DMX IVのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Dover Blackmer DMX IV 15 ページ。 Air elimination system

ページを印刷する

Model No. :______________________________________

DMX Serial No. :__________________________________

Pump Serial No. :_________________________________

ACP Serial No. :__________________________________

FD Serial No.:_________________________________ ___

Conversion kit Serial No. :_________________________

Date of Installation :______________________________

It is Blackmer's field experience that when a truck is

designed for dual use, utilizing a 3" TXD3 Pump, the( ACP )

Air Control Panel regulator s should be set at 100 PSI on the

Hi Pressure Regulator and 50 to 55 PSI on the Low

Regulator. This will allow the pump to overcome back

pressure created utilizing 1 1/4" or 13/8" hose and nozzle.

THE BLACKMER DMX III AIR ELIMINATION SYSTEM MUST ONLY BE

INSTALLED IN SYSTEMS DESIGNED BY QUALIFIED ENGINEERING

PERSONNEL. SYSTEM DESIGN MUST CONFORM WITH TO ALLAPPLI-

CABLE REGULATIONS AND CODES AND PROVIDE WARNING OF ALL

SYSTEM HAZARDS.

THE ENCLOSED IOM APPLY TO DMX III WHERE THEUPGRADE KIT

HAVE BEEN INSTALLED. SEE ENCLOSE AVIEW OF THE UPGRADE KIT.

NT 201B-A00 04.06 DMX IV Air elimination system e

3. DMX DATA

4. SYSTEM CONSIDERATIONS

NOTICE :

Pump Operating Pressure :________________________

Flow Detection Flowrate :__________________________

Low Pressure ACP Setting :________________________

High Pressure ACP Setting :_______________________

Maximum Flowrate full hose :______________________

Maximum Flowrate empty hose :____________________

WARNING

Hazardous machinery

can cause severe

personal injury

or property damage.

WARNING

Hazardous

machinery

can cause serious

personal injury.

The Blackmer DMX IV Air Elimination System is designed for air-

free delivery of metered fuels. The system includes the follo-

wing : Blackmer DMX IV Air Eliminator, Blackmer Air Control

Panel, Blackmer Pneumatic Flow Detector/Check Valve and

Blackmer TXD series pump with a DMX pneumatic type relief

valve.

Meters are not supplied by Blackmer.

REFER TO THE METER MANUFACTURER'S RECOMMENDATIONS

REGARDING INSTALLATION AND USE. IN PARTICULAR ASSURE

COMPATIBILITY WITH THE FLOWRATE AND PRESSURE CHARACTE-

RISTICS OF THE DMX IV AIR ELIMINATION SYSTEMS.

4/15

FAILURE TO SET THE VEHICLE EMER-

GENCY BRAKE AND CHOCK WHEELS

BEFORE PERFORMING SERVICE CAN

CAUSE SEVERE PERSONAL INJURY OR

PROPERTY DAMAGE.

FAILURE TO DISCONNECT AND LOCKOUT

ELECTRICAL POWER OR ENGINE DRIVE

BEFORE ATTEMPTING MAINTENANCE

CAN CAUSE SEVERE PERSONAL INJURY

OR DEATH.

NOTICE :