- ページ 8
車椅子 Foldawheel PW-4 4Q SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Foldawheel PW-4 4Q Series 20 ページ。

The Status Indicator
07
The status indicator is located underneath the power button.
When the system is not powered up, the status indicator is not lit.
When the system is powered up, and there are no faults with the
system, the status indicator will be lit green.
If, when powered up, there is s fault with the system, then the
status indicator will flash red. The number flashes will indicate the
type of error.
Battery Gauge
The battery gauge comprises five different LEDs (1x red, 2x amber,
2x green), situated above the remote module's horn button.
The number of LEDs lit depends on the status of the battery.
The battery gauge LEDs are also used to display charging
information.
High Voltage Warning
A high voltage warning is indicated by all LEDs on, and the green
LEDs flashing. This occurs when the battery voltage level has risen
above the high voltage warning set-point.
Low Voltage Warning
A low voltage warning is indicated with the left-most LED flashing.
This occurs when the battery voltage level has decreased below its
low voltage warning set-point.
Cut-off Voltage
When the battery voltage decreases below the battery cut-off voltage:
- The status indicator will flash
- The first (red) LED will flash on the battery gauge
- The horn will sound once every 10 secends