- ページ 11

インターホン・システム Dahua VTO2000A-BのPDF クイック・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。Dahua VTO2000A-B 13 ページ。 Video door entry system

Keypad Configuration

When using the keypad module, first add it to the layout as described on page 8. The keypad module has two primary functions,

calling and password entry. To make a call to a specific room, simply enter the room number followed by the phone button.

To configure password entry;

There are two types of password that can be used, Self Password or Uniform Password.

Configure which type of password is to be used in System Config > Local Config > Password Unlock Type

Self password is an individual password given to each user, this is created when adding the VTH monitor in the Indoor Manager

menu, as described on page 4.

Uniform Password is a global password used for all users, rather than a password being issued on an individual basis.

The uniform password is configured in System Config > Local Config > New Unlock Password.

Once the password type has been selected and a Uniform Password set (if required), click OK to save the configuration.

The format when entering the password on the keypad is # > Password > # as an example, a password of 888888 would be entered

as #888888#.

Tel: +44 (0)1457 874 999 | Fax: +44 (0)1457 829 201 | Email: [email protected] | Online: www.cop-eu.com