ページを印刷するADA Wall Frame Adjustable
Step 3: Fasten Glides to the Floor
a. Rotate glides so that the moun ng hole is poin ng towards the center of
the booth.
b. With a pencil, mark the hole loca on on the floor using the holes in the
glide.
c. Turn the glide away 90 degrees from its current posi on to expose the
mark on the floor.
d. Using a hammer drill and a 1/4" masonry bit, drill a 1 1/4" deep hole on
the pencil mark.
e. Place a plas c anchor in the hole and then rotate glide back so its hole
lines up with the plas c anchor in the floor.