ディスペンサー Dover HYDRO EvoWashのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Dover HYDRO EvoWash 19 ページ。

Safety Precautions

WARNING!

Please read precautions thoroughly before operation. Meet all applicable local codes and regulations.

Please use this equipment carefully and observe all warnings and cautions.

protective clothing and eyewear when dispensing chemicals or other materials or when working in the

WEAR

vicinity of all chemicals, filling or emptying equipment, or changing metering tips.

observe safety and handling instructions of the chemical manufacturer.

direct discharge away from you or other persons or into approved containers.

dispense cleaners and chemicals in accordance with manufacturer's instructions. Exercise CAUTION when

ALWAYS

maintaining your equipment.

reassemble equipment according to instruction procedures. Be sure all components are firmly screwed or

latched into position.

equipment clean to maintain proper operation.

KEEP

only to water tap outlets with 30 to 90 PSI (2 to 6 bar), water temperature 40°F to 140°F (5°C to 60°C).

ATTACH

if the unit is used to fill a sink, or the discharge hose can be placed into a sink. The unit must be mounted so

that the bottom of the cabinet is above the overflow rim of the sink

NOTE

if the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified

persons in order to avoid a hazard.

introduction

Package Contents

1) EvoWash Dispenser (P/N varies by model)

2) Mounting Kit (P/N HYD90097975)

(Wall Anchors, Screws, Wire Ties and Washers)

3) Accessory Kit (NA P/N

HYD10099378, Global P/N

(Pickup Tubing, Detergent Injection Fitting, Conductivity Probe)

4) Rinse Pump Accessory Kit (only w/Rinse Pump) (P/N

(Pickup Tubing, Wire Ties, Rinse Injection Fitting, Foot Valve & Weight)

Description (North America vs. Global]

The EvoWash is a powder or solid detergent dissolver for use with warewash machines, with an optional, integrated rinse

pump. The built-in programmable control unit promotes safe and economical use of warewash supplies, ensuring accurate,

automatic chemical dosage, only as needed. The North America models include a backflow prevention vacuum-breaker to

meet ASSE 1055 and a conduit connector for the power, detergent and rinse signal wires to meet UL requirements.

General Specifications