- ページ 8
レシーバー Amphony 1520のPDF ユーザー・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。Amphony 1520 20 ページ。 5.8 ghz digital wireless audio transmitter / amplifier
Amphony 1520 にも： トラブルシューティングマニュアル (4 ページ), 技術仕様 (2 ページ), 機能比較 (1 ページ), 仕様 (4 ページ), よくある質問 (5 ページ), 製品情報 (4 ページ), 製品情報 (4 ページ)
ページを印刷する
User and Installation Guide
Step 3
Step 3
Placing the transmitter and amplifier
For optimum reception, the amplifier should be placed within the line of sight
from the transmitter. If possible, the amplifier should be placed right side up
with its front toward the transmitter.
The transmitter should be placed at an elevation such that there are no
obstacles between the transmitter and amplifier (line of sight) in an area
where there will be the least amount of traffic. We suggest that you place the
transmitter on top of your audio source. Example 1 on page 8 shows the
optimum placement of the transmitter and amplifier.
The amplifier can also be placed as shown in example 2. In this case, no line
of sight exists and the operating range is reduced.
You can mount the amplifier vertically by using the 2 screw openings at the
bottom of the amplifier. If the amplifier is mounted vertically, the operating
range is reduced compared to mounting the amplifier right side up.
The amplifier incorporates a directional antenna which prefers signals
transmitted toward the front of the amplifier. Therefore, the front of the
amplifier should always be facing toward the direction of the strongest
transmitter signal. By properly orienting the amplifier, interference from other
signal sources can be minimized.
We suggest that you experiment with placement in order to find the best
location for the transmitter and amplifiers.
Note: This product will not work properly from within an enclosed metal
cabinet.
R R
Page 7