- ページ 8
ベビーカー Combi Twin SportのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Combi Twin Sport 13 ページ。
Combi Twin Sport にも： 取扱説明書 (13 ページ), 取扱説明書 (13 ページ)
ページを印刷する
Removing/Attaching the Seat Cushion
Seat Base
Attaching
1. Attach hook & loop fastener
at the bottom of the seat pad
to hook & loop fastener on
the stroller base.
2. Pull top of seat pad forward;
the seat pad can rest on the
front guard rail.
3. Insert buckle strap into slot at
the bottom back of the seat
Removing & Attaching the Front Swivel Wheels
Place front swivel wheel assembly
on the swivel shaft. The assembly
is secure when it locks onto the
shaft.
Using the Basket
Removing
Unfasten clips on front and side of basket.
Attaching
Reverse the procedures for removing.
Removing
1. Press levers down on
right and left harness
hooks to detach hooks
from buckle tongues.
2. Press buckle button
down (with Combi logo)
hook & loop
and detach buckle
fasteners
tongues from buckle.
3. Remove shoulder pads
from harness by pulling
over harness
hooks.
pad.
4. Locate zipper on the back
of the seat pad and locate
the zipper in the seat bite
of the stroller. (The boot
also has a zipper; do not
use the boot zipper to
attach the cover)
Removing the Swivel Wheels
Press in the square button
located at the bottom of the
wheel holder while pulling the
assembly off of the swivel
shaft.
CAUTION
Do not place more than 10 lbs. in either basket. Remove
all items from the basket before folding the stroller.
CAUTION
If seat cushion is ripped or torn,
do not use.
Do not use the stroller without
the seat cushion.
4. Pull top of seat pad forward to
detach hook & loop fastener.
5. Pull all the harness straps
through the top and side slots in
cover.
6. Unzip zipper at the base of the
seat cover.
7. Pull bottom of seat pad upward
to detach hook & loop fastener
Zip seat pad to stroller.
5. Insert harness straps with
hooks and harness straps
with buckle tongues thru
slots on back of seat pad.
6. Attach hook & loop fastener
on top of seat pad to stroller.
Release Button
- 8 -