- ページ 17

自転車 Ampler Curt 2019-2021のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Ampler Curt 2019-2021 18 ページ。

Installing the trailer adapter

Our Ampler trailer adapter is compatible with most Thule, Burley and

Croozer trailers. It adapts our M12 thread to an M10.

1. Remove the nut from the left side of the rear drop-out. Do not

remove the black washer from the rear dropout - keep it on the

axle.

2. Attach the adapter to the axle. Use a 19 mm wrench and make sure

that the adapter is properly secured.

3. Remove the topmost bolt on the adapter with a 13 mm wrench,

leave the two silver washers on top of the adapter.

4. Finally, use the bolt to fasten the trailer hitch onto the adapter.

Alao note the instructions provided by the trailer manufacturer