- ページ 5

製氷機 Follett HCC1010WHTのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Follett HCC1010WHT 8 ページ。 Self-contained chewblet ice machine
Follett HCC1010WHT にも：マニュアル (8 ページ)

ページを印刷する

3 – Undercounter/in-cabinet mounting and ventilation

Using Follett supplied grilles

Horizon Elite ice machines can be installed undercounter/in‑cabinet to fill bins or dispensers using RIDE technology. Care must be

taken to ensure proper cabinet venting to avoid recirculation of hot air. Improper venting can cause ice machine outages.

Supplied

grilles

exhaust

cabinet door

supplied intake grille

Important specifier notes for using Follett supplied grilles

1. The supplied exhaust grille must be located at least 18.00" (45.7 cm)

from the supplied air intake grille (exhaust air must not recirculate

with intake air).

2. Cabinet interior must be open to allow for unrestricted exhaust

air flow.

3. Ice transport tube needs minimum 1/4" per foot (2 cm per meter)

pitch toward ice machine and should be secured to prevent dips and

traps from forming.

Self-contained 1010, 1410 series ice machine

Horizon Elite

ice machine

18.00" (45.7 cm)

minimum

25.25" (64.1) cm)

23.50"

(59.69 cm)

Cabinet door

air in

minimum

must mate directly

to air intake gasket

air intake gasket

door & gasket

must mate

directly

locating

cutout

2.00"

(5.08 cm)

cutout for supplied air intake grille

24.00"W x 16.00"H (61.0 cm x 40.6 cm)

minimum

electric

water

drain

12.00" (30.5 cm) minimum

between ice machine

and dispenser

Horizon Elite ice machine

2.25" (5.72 cm)

cutout

bottom of ice machine

side of ice machine

4. Cabinet door must mate directly to air intake gasket.

5. Cabinet interior must provide a minimum clear space of 23.50"

(59.7 cm) high by 25.25" (64.1 cm) deep.

6. Cutout for supplied grilles must meet minimum size requirements

shown above.

7. Utilities should be conveniently located as shown.

Ice transport tube

minimum 1/4" per foot

(2 cm per meter)

pitch toward ice machine

secure to prevent dips

and traps from forming

see dispenser

speciﬁcation

sheet for

installation

requirements

Completed installation with

gasket and door in place –

Side view

25.25" (64.1 cm) min.

Front

23.50"

(59.7 cm)

minimum

Form# 7030