- ページ 3

ベビー＆幼児用家具 Combi Deluxe Activity Rocker 9725 SeriesのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Combi Deluxe Activity Rocker 9725 Series 8 ページ。

ページを印刷する

Installing the Optional Speakers

CAUTION

Be sure to test the volume on your player. Set it

at a comfortable level so that it does not startle

your baby when turning it on. Loud volume can

hurt your baby's ears. If you notice that the sound

has become weak or distorted or if tracks do not

change, this is an indication that your batteries are

low. Replace the batteries and set the volume at a

comfortable level.

WARNING

To avoid serious injury keep stereo speakers and

cords out of reach of children.

Speaker Wire

Guide

(inside canopy)

Installing the Toy Bar

Toy bar

holder

Clamp

Seat cushion

Front tube

Speaker Wire Path: on each side of the

canopy enclose the Speaker Wire in its

Wire Guide then place wire behind the

seat toward the Player Storage Pocket.

The canopy has two Wire

Guides, located on the

inside of each side of

the canopy.

WARNING

Never lift Deluxe Activity Rocker using the toy bar.

To install the toy bar, place the notch in the clamp of the toy bar holder

into the hole on the front tube (located above the footrest).

Note:

Clamp must be positioned behind the toy bar holder in order to insert into

the front tube.

CAUTION

Before folding your Deluxe Activity Rocker, be sure

to remove your player from the back pocket of the

canopy.

This will make it easier to fold the Deluxe Activity Rocker.

When you fold the Deluxe Activity Rocker, you may leave the

speakers in the Acoustic Canopy, but only for shortperiods of

time.

In the summer, the temperature may get as high as 150°F/65°C

or more in your car or car trunk. Do not leave your Deluxe

Activity Rocker (with the speakers in the Acoustic Canopy pock-

ets) in your car trunk where the temperature may reach these

high levels. Store speakers in a cool and dry area.

Make sure the canopy is in the open

position before installing speakers.

1. While facing the back of the canopy,

thread each speaker underneath the can-

opy over the right and left canopy hold-

ers. Insert the speakers into pockets and

velcro them closed.

2. Next, run the speaker wires through each

guide and Velcro them closed.

3. Grasp the jack on the speaker wire and

place behind the seat cushion. The jack

must come through the bottom of the

canopy.

4. The seat cushion has a storage pocket on

the back. Place your portable CD,

cassette, mini-disc or MP3 player inside

the back pocket.

5. Insert the (2.8 mm) mini-plug into the

player. Turn on your player.

- 3 -