バイクアクセサリー Dowco Fastrax SeriesのPDF インストレーション・インストラクションをオンラインで閲覧またはダウンロードできます。Dowco Fastrax Series 2 ページ。 Bag installation: 04891 backroads small tank bag
ページを印刷するWARNING
Please read and understand these instructions completely before installation to avoid possible injury to yourself or damage to
the accessory or vehicle. If you are unsure of your ability, seek the help of a qualified mechanic.
Overloading any Tail Bag will result in a high center of gravity which will cause bike to be come top heave and susceptible to
unexpected tipping, especially on lean-in, while negotiating high speed turns. Maximum allowable load limit is 5 lbs.
Eliminate hanging straps by trimming; hanging straps can become entangled in moving parts. Failure to do so may result in
injury or damage to the accessory or motorcycle.
1. Parts List:
This Product contains the following components. Before beginning installation confirm there are no missing or damaged
components.
Item #
1.
Tank Bag
2.
Strap 36" long with (1) J-hook, and loop
3.
Strap 24" long with (1) male quick release buckle, and loop
2. Preparation:
Note: This product is supplied with a scratch resistant rubberized bottom layer. Care should be taken to avoid gas spills
and heavy buildup of dust and/or dirt under the bag; this may lead to scratches in the paint finish. Therefore the following
preparation should take place before mounting the luggage.
▶ Place motorcycle on a secure, level surface
▶ Clean all mounting surfaces before beginning installation.
3. Installation:
Remove seat
▶
Locate 24" long strap with (1) quick release buckle and loop.
▶
Thread this strap around steering post insuring that strap does not interfere with steering or control lines. (Fig. 2)
▶
Locate the 36" long strap with (1) J-hook and loop.
▶
Thread this strap loop under the tank mounting or around frame under seat.
▶
Pass J-hook through strap loop to secure strap securely to frame or tank mount (Fig 3)
▶
Place and center bag directly on tank.
▶
Securely fasten steering post strap to buckle on front of bag. (Fig. 2)
▶
Securely fasten 36" long strap J-hook to D-ring on back of bag. (Fig. 3)
▶
Adjust all straps to securely position bag in desired location with rubber side of straps facing all bike components.
▶
Reassemble seat.
▶
Make sure that the bag does not interfere with steering between full left and full right positions. If you encounter
▶
interference, read adjust bag position using adjustable straps.
142634-00
INSTALLATION INSTRUCTIONS
BAG INSTALLATION: 04891 BACKROADS SMALL TANK BAG
Description
INSTALLATION CONTINUED ON REVERSE SIDE
Qty
1
3
1
11/14