- ページ 4

業務用食品機器 CombiSteel 7013.2400のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。CombiSteel 7013.2400 8 ページ。 Glass polisher

Operating Instruction

ATTENTION!

GLASSES AND CUPS HAVE TO BE WET, PREVIOUSLY WASHED AND RINSED BEFORE DRYING AND POLISHED WITH

THE MACHINE.



This machine with 5 brushes is ideal to dry or polished all of various cup & glasses.



The center brush is used for drying the inside of a glass, while the four outside brushes use for polishing the

outside.



Wash the glass, grasp the glass at the base and insert into the central brush. Leave it in the drying position

for a few seconds. (Photo 1 )



For the flute glass, first dry the steam putting it between the brushes than grasp the glass from the base to

dry the cup (Photo 2.)

WARNING:



THE MACHINE SHOULD NEVER BE USED OR OPERATED WITHOUT THE BRUSHES AND AIR CONVEYING

MANIFLOD IN PLACE.



WHEN THE MACHINE IS RUNNING. DO NOT THE ROATING BRUSHES WITH BARE HANDS AND DO NOT INSERT

OBJEXTS OTHER THAN GLASS IN BETWEEN THE BRUSHES.



DO NOT INTRODUCE OTHER OBJECTS INTO THE VENTILATION OPENINGS OF THE MACHINE BECAUSE THEY

COULD COME INTO CONTACT E WITH POWERED PARTS AND CAUSE SHORT CIRCUITS WITH CONSEQUENT

RISK OF FIRES AND ELECTRIC SHOCKS.



ALWAYS WEAR A CAP COVERING ALL OF YOUR HAIR IF IT IS LONG.

Clean the external surface of the machine once a day in order to remove the substances that may have deposited

on these surfaces. Use a damp sponge and dry the surfaces with a soft cloth. Do not immerse the machine in

water or wet it.

The machine have five brushes with central one being smaller as compared to the others. Disconnect the

machine from the power supply and unplugged it. Remove the brushes by rotating them counter clock wise and

removing them from the top. Mount the new brushes one at a time by inserting them into their slots and rotating

them clockwise to fix them in place (until the snap in place.) Connect the machine to the power supply and press

the PN/OFF switch.