- ページ 6
製氷機 Follett Horizon Elite 1810 SeriesのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Follett Horizon Elite 1810 Series 8 ページ。 Ice machine models with ride technology
Follett Horizon Elite 1810 Series にも： 取付説明書 (13 ページ), 取付説明書 (17 ページ), マニュアル (8 ページ)
ページを印刷する
2 – Undercounter/in-cabinet mounting
Cabinet details
Important specifier notes
1. Cabinet door opening
must meet minimum size
requirements shown and be
free of obstructions to allow ice
machine to slide out (no lip or
utilities to block removal).
2. Cabinet base must be capable
of supporting ice machine and
allow ice machine to rest flat on
cabinet bottom.
3. No counter supports, electric
or plumbing can run in front of
the ice machine.
3 – Horizon Elite ice machine mounting accessories
Optional wall mount bracket
23.00"
(58.4 cm)
6
Form# 8180
Ice transport tube
Cabinet door opening
24.00"W x 23.5"H
(60.9 cm x 59.7 cm) minimum
Optional machine stand
22.00"
(55.9 cm)
B
25.50"
(64.8 cm)
A - 15.875" (40.3 cm)
B - 19.375" (49.2 cm)
minimum 1/4" per foot
(2 cm per meter)
pitch toward ice machine
secure to prevent dips
and traps from forming
slides
out
Cabinet base
must be flat and free of obstructions
(no lip or utilities to block removal)
6.88"
(17.5 cm)
A
C
D
C - 13.00" (33.0 cm)
D - 21.00" (53.3 cm)
Remote 1810, 2110 series ice machine
12.00" (30.5 cm) minimum
between ice machine
and dispenser
Important specifier notes
1. For secure wall mounting, specify
optional wall mount bracket.
2. Wall and fasteners must support the
weight of the ice machine, bracket,
supply water and ice. Use of a backing
board may be required with hollow wall
construction.
3. Machine stand mounting adds 6.88"
(17.5 cm) to height of ice machine.
4. No dips in tube routing allowed.
5. Ice transport tube needs minimum 1/4"
per foot (2 cm per meter) pitch toward
ice machine and should be secured to
prevent dips and traps from forming.