- ページ 7

業務用食品機器 CombiSteel 7472.0005のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。CombiSteel 7472.0005 19 ページ。 Chicken rotisseries electric

2.4 REPLACEMENT OF ELECTRICAL ELEMENTS

Heating Element (7472.0030, 7472.0035, 7472.0040, HK5, HK3A, HK9)

For heating elements and other only the right cover of the appliance need to be removed.

NHK4

For the lower two heating elements draw and remove the right painted glass at the bottom of the appliance.

Release the wires and remove the heating element's holding screws inside chamber. Draw out the heating

element and make the replacement.

To replace the upper heating element remove the right adjoining pyrex glass and the right column cover of the

appliance. Release the wires and remove the heating element's holding screws inside chamber. Draw out the

heating element and make the replacement.

For the motor unscrew supporting base of the motor (same steps for all models).

For thermostats, indicating lamps, switches, draw and remove the right painted glass at the bottom of the

appliances.

CUT OFF THE POWER SUPPLY BEFORE COVER REMOVAL.

The personnel who are to install and connect the appliance must train the users appropriately so that they can

handle the operation and safety measures of the appliance.

ATTENTION !!!



Check that main voltage in your working area is suitable for the settings on the label and that the appliance

is properly earthed.



Before any service activity takes place or any parts are replaced on the appliance, make sure that pains

supply is turned off.

THE MANUFACTURER CANNOT BE HELD RESPONSIBLE FOR ACCIDENTS AND DAMAGE CAUSED TO PERSONS,

ANIMALS OR PROPERTY DUE TO NONCOMPLIANCE WITH THESE INSTRUCTIONS.