- ページ 5
自動車アクセサリー Caraudio-Systems c.LOGiC C1-PHAETONのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Caraudio-Systems c.LOGiC C1-PHAETON 9 ページ。 Av-interface, for vw phaeton, bentley continental group with zab navigation
ページを印刷する
Connect the yellow wire (CAN-HI) of the interface cable kit
to Pin 15 and the blue wire (CAN LOW) to Pin 31.
Connect the black wire of the interface cable kit to ground
(Power Plug Pin8) and the red wire to 12V permanent plus
(Power Plug Pin7).
The 3,5mm mini jack socket of the cable kit is used
to connect the corresponding control cable (e.g. "STA-AL25"
for DVD Alpine devices) for device controls.
The optionally available Y-Adapter "CABLE-415"
(sold separately) allows to connect the IR-receiver of the
video source parallel to the interface.
(Please refer to pages 9 and 10 for details regarding control cables.)
STA-xxxx cable kit
Use a Video / Audio cinch cable (sold separately) to connect
the video source to the three cinch sockets of the interface.
Re-attach the navigation system to the center console.
2.2.
Activation of the interface:
In order to activate controls for the connected devices
the system needs to be switched to TV mode by pushing
the "AUDIO/TV" button followed by the "TV" button.
Version 16.02.2010