- ページ 5
自動車アクセサリー Caraudio-Systems TV-Free TF-FSYNC54のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Caraudio-Systems TV-Free TF-FSYNC54 6 ページ。 Video-in-motion interface
ページを印刷する
1.5.
Connection schema
2. Installation
Switch off ignition and disconnect the vehicle's battery! If according to factory rules
disconnecting the battery has to be avoided, it is usually sufficient to put the vehicle is
sleep-mode. In case the sleep-mode does not show success, disconnect the battery with a
resistor lead.
3. Activation of the video-in-motion function
The video-in-motion can be activated and deactivated by Dip 1 on both TV-500 modules or
alternatively by the included loose green cables in connection with a switch (not included in
delivery).
Video-in-motion permanent
With dip1 to ON on both TV-500 modules the video-in-motion function is activated
permanently. The navigation can not be used.
Video-in-motion selective (recommended for the use of navigation)
With dip1 to OFF on both TV-500 modules the included green cables are used to activate the
video-in-motion function.
Connect a switch to the green cables and connect the green cables to +12V ACC.
●
+12V
= TV-Free is activated
●
0V
= TV-Free is not activated
Version 29.04.2015
All manuals and user guides at all-guides.com
TF-FSYNC54