- ページ 7

製氷機 Follett Horizon Elite HCD1410NJSのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Follett Horizon Elite HCD1410NJS 8 ページ。 Ice machine models with ride technology installation instructions for drop-ins
Follett Horizon Elite HCD1410NJS にも：取付説明書 (17 ページ), マニュアル (8 ページ)

ページを印刷する

5 – Horizon Elite ice tube runs - specifier guidelines

Long tube runs for RIDE remote ice delivery equipment

beverage

dispenser

minimum of

6.00" (15.24 cm)

turn/corner

ice transport tube –

1 3/16" OD,

2 1/8" OD with insulation

Remote condensing unit

Condensing unit installation specifications

Important specifier notes

1. Provide front, back and side clearances

as shown.

2. The maximum refrigerant line run length is

100' (30.5 m). Installations require 13-15 lb

of refrigerant depending on the line run.

3. The maximum line rise above the evaporator

is 35' (10.7 m). Condensing unit above

evaporator unit – 35' (10.7 m) (installations

with rise over 20' (6.1 m) require additional

suction line s-trap at midpoint rise).

4. The evaporator can only be mounted

a maximum of 15' (4.6 m) above the

condensing unit.

Note: The service loop is not included

when calculating length, rise or drop in the

tubing run.

Note: To connect evaporator/ice machine to rack systems, see page 3.

Remote 1010, 1410 series ice machine

support

maximum

straps

2' (60.9 cm)

radius

transport tube slope

(toward ice machine)

1/4"

(2 cm per meter)

wall-mounted

ice machine

24.00"

(61.0 cm)

48.00"

(121.9 cm)

Important specifier notes

1. 75' (22.8 m) maximum ice transport

tube run.

2. Tubing routing bends must have a

6.00" (15.24 cm) radius or larger.

3. Dips and traps are not allowed. If not

supported from underneath, secure

insulated ice transport tube at least

every 2' (60.9 cm) to prevent drips

and traps.

4. Relative humidity levels above 80%

in areas where the ice machine or ice

transport tube is located may produce

excessive condensation that will cause

water damage.

5. Contact factory for recommendations

on running tubing through a decorative

soffit or chase.

air in

48.00"

(121.9 cm)

24.00"

(61.0 cm)

Form# 7035